Hitachi Starter Motor S108-41

Every decal in this store is made to order from our workshop in Charleroi, Belgium.

Orders are dispatched twice a week and usually reach Europe and North America within around 10 days, and the rest of the world in 10–30 days. Registered Mail is free for orders over €150 / $150.

Every decal is redrawn from NOS / deadstock originals, so shapes, proportions and colors stay as close as possible to the factory artwork.

They’re printed on 3M-like cast vinyl using heritage American-made machinery, with small-batch production to keep quality consistent.

1. f your kit comes as a combined sheet, cut it so each decal is on its own piece.
2. Mock up the decals on the tank using masking tape and measure to confirm the correct placement.
3. Degrease the tank thoroughly.
4. Remove the backing paper from the first decal and place it on the tank.
5. Using a soft squeegee, chase any trapped air bubbles from the center out to the edges while the application tape is still on.
6. Peel off the application tape.
7. Repeat steps 4–6, one decal at a time, until the kit is fully installed.

Please refer to the specs table to see:

• whether clear water (wet application) is recommended for this decal set,
• whether the decals can or must be clearcoated.

Caution: acrylic lacquers only.

Parts for Harley-Davidson® Motorcycles.
Reproduction decals 100% redrawn and produced in Belgium.

Categories: Decals, Warning